"Fun Edition" - Cannondale Moterra SE

Tobias Brehler

 · 02.09.2017

"Fun Edition" - Cannondale Moterra SEPhoto: Tobias Brehler
"Fun Edition" - Cannondale Moterra SE
Cannondale is launching an SE version of the Moterra E-Fully. It comes with a 140 mm fork, E-specific equipment and Bosch Performance CX motor.

SE means for CannondaleMore suspension travel, thicker tyres - in short: more fun. The Americans do not specify a specific gear ratio for SE. We think "Fun Edition" fits quite well. The Moterra SE is positioned between the "normal" Moterra with 130 millimetres of travel and the "Long Travel" with 160 millimetres. It is based on the 130 mm Moterra, but has a 140 millimetre fork.

  The low-lying battery is the Moterra's recognisable feature. <a href="e_mtb/e_mtb_news_neuheiten/emtb-neuheiten-cannondale-fullys-moterra-+-moterra-lt/a32795.html" rel="noopener noreferrer">Here you will find a first ride report</a> .Photo: Tobias Brehler The low-lying battery is the Moterra's recognisable feature. Here you will find a first ride report .  The 2.85 inch wide Onza Canis sits on a WTB rim with a 30 mm rim width.Photo: Tobias Brehler The 2.85 inch wide Onza Canis sits on a WTB rim with a 30 mm rim width.

Like all other Moterra bikes, the SE version also comes with the Bosch Performance CX motor and 500 Wh battery. The special feature of the Moterra line is noticeable at first glance: The Americans don't simply bolt the energy reservoir onto the down tube, but hang it on the bottom. The resulting lower centre of gravity makes for a very good handling, as the Moterra proved in the EMTB test.

The Cannondale Moterra SE is available from dealers for 5700 euros. The Fox 34 Performance E-Optimised fork with 140 millimetres of travel absorbs the shocks at the front, while a Fox Float shock with 130 millimetres at the rear. The eight gears are shifted by the Sram EX1 drivetrain and the brakes are fitted with Guide RE stoppers. The 2.85 inch wide Onza Canis sits on a 30 millimetre wide WTB rim.

  The Fox 34 Performance suspension fork was specially developed for the higher loads on E-MTBs. On the Moterra SE, it provides 140 millimetres of suspension travel.Photo: Tobias Brehler The Fox 34 Performance suspension fork was specially developed for the higher loads on E-MTBs. On the Moterra SE, it provides 140 millimetres of suspension travel.  The eight gears are shifted by the Sram EX1 drivetrain.Photo: Tobias Brehler The eight gears are shifted by the Sram EX1 drivetrain.
How do you like this article?

Most read in category Bikes