City useMudguards and pannier rack for E-MTBs

Markus Greber

 · 25.05.2020

City use: mudguards and pannier rack for E-MTBsPhoto: Markus Greber
City use: mudguards and pannier rack for E-MTBs

In this article, we use so-called affiliate links. With every purchase through these links, we receive a commission from the merchant. All relevant referral links are marked with . Learn more.

E-MTBs are increasingly being seen in everyday use: attach a mudguard, fit a pannier rack - and the sports bike becomes a utility vehicle. We have checked out the right attachments.

There is no question that e-mountain bikers primarily have sporting ambitions. However, more and more bikers are also using e-MTBs as all-round bikes - for example, for commuting to work or cruising through the city. Why? Firstly, thanks to the electric drive, you can get to your destination without breaking a sweat, at least if you want to. And secondly, e-mountain bikers have access to all kinds of trails - trails, forest and field paths as well as cycle paths and roads. But if you don't want to get off your bike covered in dirt like a Wiener schnitzel, your bike needs to be equipped for all weathers.

One thing up front: if you want to cycle to the office in business chic on your E-Fully, there's no getting round suitable protective clothing. Because effective Mudguards must be long and close to the tyre so that shoes, legs, back and backside stay dry in wet conditions - fully riders, on the other hand, cannot completely protect themselves from dirt.

When it comes to mounting pannier racks, fully riders are again at a disadvantage. It is true that you can transport light luggage with models that are mounted on the seat stays. However, with every gram of load, you lose comfort and performance, as the rear wheel can no longer spring as usual.

You can find out how well you can upgrade e-hardtails and e-fullys with mudguards and pannier racks in the article "SUV accessories" from EMTB 1/2020, which you can download as a PDF below. The entire buying guide including all reviews costs € 1.99

Why not free of charge? Because quality journalism has a price. In return, we guarantee independence and objectivity. This applies in particular to tests and buying advice in EMTB. We don't charge for them, but the opposite is the case: we do charge for them - hundreds of thousands of euros every year.

How do you like this article?
FRX Mudhugger (Mudguard)
Photo: Markus Greber

Not every bike can be fitted with accessories without further ado. The e-MTB must already fulfil certain requirements. Check your bike for these facts:

  Fork threads: Only Suntour equips all forks with integrated screw threads. Mudguards or even fixed mudguards with struts can be securely bolted to the rear of the bridge and both ends of the lower tube.Photo: Markus Greber Fork threads: Only Suntour equips all forks with integrated screw threads. Mudguards or even fixed mudguards with struts can be securely bolted to the rear of the bridge and both ends of the lower tube.  Open steerer tube: If the steerer tube is accessible from below, mudguard mounts with a clamping cone can be attached to forks with a 1 1/8 or 1.5 inch diameter. The cone is clamped once in the steerer tube and the mudguard is clicked onto it as required.Photo: Markus Greber Open steerer tube: If the steerer tube is accessible from below, mudguard mounts with a clamping cone can be attached to forks with a 1 1/8 or 1.5 inch diameter. The cone is clamped once in the steerer tube and the mudguard is clicked onto it as required.  Threaded eyelets: Many hardtails offer recessed frame threads on the seat stays, in the stays and on dropouts. These are the only places where standard pannier racks and mudguards find a perfect fit.Photo: Max Fuchs Threaded eyelets: Many hardtails offer recessed frame threads on the seat stays, in the stays and on dropouts. These are the only places where standard pannier racks and mudguards find a perfect fit.
  Custom accessories: Manufacturers such as Centurion also equip their fullys with frame threads. They offer specially customised solutions with which their E-MTBs can be retrofitted. However, only these special parts fit the respective bike.Photo: Markus Greber Custom accessories: Manufacturers such as Centurion also equip their fullys with frame threads. They offer specially customised solutions with which their E-MTBs can be retrofitted. However, only these special parts fit the respective bike.  You can download this article or the entire EMTB 1/2020 issue in the EMTB app (<a href="https://itunes.apple.com/de/app/emtb-das-magazin-fur-e-mountainbiker/id1079396102?mt=8" target="_blank" rel="noopener noreferrer nofollow">iTunes</a> and <a href="https://play.google.com/store/apps/details?id=en.delius_klasing.emtb" target="_blank" rel="noopener noreferrer nofollow">Google Play</a> ) or order the edition in the <a href="https://www.delius-klasing.de/emtb-01-2020-emb-2020-01" target="_blank" rel="noopener noreferrer">DK-Shop</a> .Photo: Markus Greber You can download this article or the entire EMTB 1/2020 issue in the EMTB app (iTunes and Google Play ) or order the edition in the DK-Shop .

Downloads:

Most read in category Bikes